A outside one piece die cut corrugated design using durable 275#B kraft board that has top lid and a front panel that opens to pull out the drawers and closes and held in place with VELCRO buttons.
The outside die cut has hand holes on both sides for easy handling.
The drawers are die cuts corrugated made of durable 200#E kraft board with a handhold in front to pull out the drawers.
Each drawer/tray has a four-channel expanded polyethylene beaded flexible foam/soft for maximum protection glued to it making each individual drawer/tray strong very.
Included in each cell is the blocker strip that is inserted to fill any gap to keep cars and engines from moving.
The capacity of the three drawer storage and carrying case is for HO 48 – 40′ box cars,24 – 85′ passengers cars,auto racks, super liner passenger cars and TOFC (Trailer On Flat Cars) All lay on their sides for easy recognition and retrieving also rotating them to void couplers engaging.
For N scale capacity is 144 – 40′ box cars,144 – 85′ passengers auto racks,super liner passengers cars and TOFC(Trailer On Flat Cars).All N scale are placed upright with blocker stripe between the cars.
You will get some couplers engaging if you max out the storage case.
The size of the foam/tray is 26″ long x 13.5″ wide x 2″ high when folded to the drawer shape.
The outside die cut piece is 27″ long x 14.5 wide x 7″ high.There is no assembly required. All cell components are glued to the individual trays and placed inside the outside corrugated die cut component. This construction has a maximum weight of 45 lbs.
Storage units can be stack-able up to recommended four max high.